There are no products to Compare.

Clear selection
Close

You have no items in your shopping cart.

MXA200 Woodfloor Adhesive

Marldon Product Code: 650043
£ 100.26
Add to compare
Description

Marldon Wood Floor Adhesive is used for bonding most types of wood flooring including woodblocks, mesh-backed mosaics, engineered, laminated and solid wood plank/strip flooring.

It can also be used for floors that have underfloor heating.

It’s perfectly safe to work with for hands, floors and tools.

Specification

Package weight: 17 kg

Coverage: 1 - 1.2 square metres/kg (trowelled), 1.3 - 1.7 square metres @ 250mm centres (600ml sausage).

 

User Guide

Before using the product, try it on a small test area.

After that:

  1. Clean the subfloor and make sure it’s flat, clean, sound and dry and free from contaminants that may hinder adhesion, this includes paint, varnish, polish, old adhesive residues and plaster spots.

  2. On a smooth floor spread evenly over the floor surface with a Marldon triangular notched trowel 3mm or 4mm (Depending on subfloor and wood type)

  3. For rough-textured floors a deeper notched trowel may be required. This will adversely affect the coverage rate of the adhesive.

  4. Spread the adhesive with a sweeping motion at a 60° angle and place the wood into the adhesive while it is still wet. If using the liquid batten system apply in straight lines at right angles to the timber, laid at 250 mm centres.

  5. Press firmly or gently tap the wood into the adhesive to ensure good overall contact.

  6. Where necessary use heavy objects to hold the wood firmly in place during curing time.

  7. The bonded wood will be suitable to take foot traffic 6 to 8 hours after application. It should be left 24 -48 hours before sanding or finishing takes place.
.